South Ogden Foundation Pros logoSouth Ogden Foundation ProsFoundation Repair · South Ogden, UT
Menu
foundation crack repair in South Ogden, UT

South Ogden Foundation Pros

Foundation Crack Repair in South Ogden, UT

Epoxy and polyurethane foundation crack injection in South Ogden, sealed the full depth, not just caulked over. Free estimates.

Serving South Ogden and nearby communities.

Freeze-thaw cycles on the Wasatch bench open hairline cracks every winter, and by spring plenty of South Ogden homeowners find them wider and sometimes wet.

South Ogden Foundation Pros injects epoxy or polyurethane into the full depth of the crack rather than skimming caulk over the surface. The right material depends on whether the crack is actively leaking or just dry and cosmetic.

What's included

What's Included with Foundation Crack Repair

Typically included

  • Crack pattern assessment, length, width, and direction
  • Surface prep and injection port setup
  • Epoxy or polyurethane injection matched to crack type
  • Surface finishing and seal check

Optional

  • Exterior grading check if water is tracking to the crack
  • Monitoring visit if the crack is tied to broader settlement

Customer prep

  • Clear access to the crack, inside and out if visible on both sides
  • Note whether the crack leaks during rain or just stays dry

How it works

How Our Foundation Crack Repair Process Works

  1. Crack Inspection photo
    Step 1

    Crack Inspection

    Each crack gets checked for type, width, and likely cause.

  2. Surface Cleaning photo
    Step 2

    Surface Cleaning

    Debris and loose material are cleared from the crack line.

  3. Injection Port Setup photo
    Step 3

    Injection Port Setup

    Ports go in along the crack for controlled material delivery.

  4. Sealant Injection photo
    Step 4

    Sealant Injection

    Epoxy or polyurethane fills and bonds the crack fully.

  5. Surface Finishing photo
    Step 5

    Surface Finishing

    Excess material is removed and the surface is smoothed.

  6. Final Inspection photo
    Step 6

    Final Inspection

    The seal gets checked to confirm it's watertight and stable.

Materials

Materials and Methods for Foundation Crack Repair

  • Epoxy Injection Resin photo

    Epoxy Injection Resin

    Bonds structural cracks back together, a fit for cracks that stay dry but signal movement in older South Ogden block foundations.

  • Polyurethane Foam Sealant photo

    Polyurethane Foam Sealant

    Expands to fill and block water, the better call when spring runoff is actively seeping through.

  • Injection Ports photo

    Injection Ports

    Let the material reach the full depth of the crack instead of just the visible surface.

  • Surface Primer photo

    Surface Primer

    Preps the concrete so the injected material actually bonds.

  • Masonry Patch Compound photo

    Masonry Patch Compound

    Blends the finished repair into the surrounding wall texture.

  • Protective Topcoat photo

    Protective Topcoat

    Shields the repair from continued moisture exposure through the next wet season.

Before & after

Before and After Foundation Crack Repair

  • foundation crack repair in South Ogden, UT
    Before
  • foundation crack repair in South Ogden, UT
    After

Timeline

How Long Does a Foundation Crack Repair Take?

  1. 01

    Assessment and port setup

    same visit

  2. 02

    Injection, single crack

    1–2 hours
  3. 03

    Surface finishing

    same visit

  4. 04

    Multiple cracks, same wall

    half day

Need a schedule that fits?

Get a Free Estimate

FAQs

Foundation Crack Repair FAQs

Is a diagonal crack in drywall a foundation problem or just settling?

Diagonal cracking, especially above door and window frames, usually traces back to foundation movement. It's worth having it looked at rather than just patching the drywall.

Can I just caulk a foundation crack myself or does it need a pro?

Surface caulk seals the face of the crack but not the depth. It can look fixed for a season and then open right back up once the ground shifts again.

How long does foundation crack repair actually take?

Most single cracks are injected and finished in one visit, often a couple of hours depending on crack length.

What affects foundation crack repair pricing?

Crack length, whether it's leaking, and whether epoxy or polyurethane is the right material all change the cost.

Do I need a permit for crack injection?

Most crack injection is cosmetic repair work and doesn't need a permit. If it's tied to a larger structural repair like piering, that part might.

When does a crack mean call a pro instead of monitoring it?

Diagonal cracks, stair-step cracking in block, or anything wider than a quarter inch are worth a call rather than a wait-and-see approach.

Next step

Get a Foundation Crack Repair Estimate in South Ogden

Call South Ogden Foundation Pros at (435) 691-6827 or request a free estimate and we'll look at the crack before quoting anything.

Ask about Foundation Crack Repair

Tell us about the project and how to reach you.

Call (435) 691-6827