
South Ogden Foundation Pros
Driveway Lifting in South Ogden, UT
Driveway lifting in South Ogden with polyurethane foam injection for sinking slabs near the garage. Free estimates, same-day lift.
Serving South Ogden and nearby communities.
A sinking driveway slab near the garage threshold is one of the most common calls South Ogden Foundation Pros gets. Bench soil settles unevenly under one corner of the slab, and the gap shows up right where the driveway meets the garage floor. Polyjacking lifts that slab back level with polyurethane foam injection. No tear-out. No jackhammer. Just small holes and a lift.
The gap at the garage edge tends to widen every winter as freeze-thaw cycles work on it. Water gets into the void under the slab, freezes, and pushes the settling along faster. Fixing it while it's still a lift job, not a replacement job, is the cheaper path. Wait a season or two and the slab can crack enough that lifting alone won't fix it anymore.
How it works
How Our Driveway Lifting Process Works
Step 1Driveway Inspection
Sunken or sloped sections are identified for correction.
Step 2Access Drilling
Small holes are drilled at strategic points along the driveway.
Step 3Foam Injection
Expanding foam is pumped beneath the slab to raise it evenly.
Step 4Slope Correction
The surface is adjusted to restore proper drainage direction.
Step 5Hole Sealing
Drilled holes are patched to blend with the existing surface.
Step 6Surface Review
The driveway is inspected for even, stable elevation.
What's included
What's Included with Driveway Lifting
Typically included: slab-by-slab assessment, foam injection at sunken sections, slope correction, hole patching.
Optional: joint resealing across the full driveway, surface sealer application for added weather protection.
Customer prep: move vehicles off the driveway for the scheduled work window.
Want a clearer scope?
Get a Free EstimateMaterials
Materials and Methods for Driveway Lifting
Foam injection outperforms old mudjacking slurry through Utah winters, which is why it's the lead method here.

Polyurethane Foam
Provides lightweight lift without adding excess weight to the soil, important on bench soils already prone to seasonal shift.

Concrete Patch Mix
Used to seal access holes after injection work, blended to match the existing driveway surface.

Joint Sealant
Reseals expansion joints disturbed during the lifting process.

Surface Sealer
Protects the driveway from moisture and future cracking.

Leveling Equipment
Ensures accurate measurement during the lifting procedure.

Bonding Primer
Improves patch adhesion to the original concrete surface.
Questions on materials?
Get a Free EstimateCost
Driveway Lifting Cost in South Ogden
| Project type | Typical range | What’s included |
|---|---|---|
| Single slab or small section | $350–$800 | one sunken panel lifted and leveled. |
| Multi-slab driveway | $900–$2,200 | several connected panels raised together. |
| Large driveway with significant void | $2,200–$4,500 | deeper void fill and more foam volume. |
These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.
Want a number for your home?
Get a Free EstimateNext step
Request a free estimate and we'll check the void before quoting anything.
Codes & permits
Permits and Codes for Driveway Lifting
Confirm with South Ogden or Weber County if your driveway touches the public right-of-way.
| Typically needs a permit | Often no permit |
|---|---|
| Any driveway work tied to the public right-of-way or city-owned apron | Standard polyjacking lift of an existing driveway slab |
| Grading changes that affect a neighboring property's drainage | Patching and sealing after a lift |
Need help with permits?
Get a Free EstimateDIY vs pro
DIY vs. Hiring a Pro for Driveway Lifting
| DIY | Hire a pro |
|---|---|
| Sealing hairline surface cracks that aren't tied to settling | A noticeable gap at the garage threshold |
| Monitoring a slight dip that isn't yet a trip or vehicle hazard | A slab edge higher than its neighbor by half an inch or more |
| — | Water pooling at the base of the driveway instead of draining toward the street |
Not sure DIY vs pro?
Get a Free EstimateWhen to call
When to Call for Driveway Lifting
Call South Ogden Foundation Pros for a free estimate before next winter's freeze-thaw cycle makes it worse.
- A gap opening up where the driveway meets the garage floor
- One slab section visibly higher or lower than the next
- Water pooling instead of draining away from the house
- A trip or scrape hazard for cars and visitors
Seeing warning signs?
Get a Free EstimateFAQs
Driveway Lifting FAQs
How much does driveway lifting cost in South Ogden?
Most single-slab jobs run $350–$800. Multi-slab sections run higher, usually $900–$2,200 depending on how many panels need lifting.
How long does driveway lifting take?
Most jobs finish in a few hours, same day. The driveway is usually drivable again shortly after the holes are patched.
Do I need a permit to lift a driveway slab?
Private driveway sections usually don't need one. Work touching the public right-of-way or city apron usually does.
Is DIY driveway leveling realistic?
Sealing a surface crack is fine as a stopgap. A sunken slab needs the void filled and the surface lifted, which takes foam injection, not a patch kit.
More services
Other Foundation Repair services

Foundation Repair
Foundation repair in South Ogden, UT: push piers, crack injection, and wall stabilization for settling homes, free estimates available.

Piering and Underpinning
Push piers and helical piers for sinking or settling South Ogden foundations, engineered load transfer with a free estimate.

Wall Stabilization
Basement wall stabilization in South Ogden with steel anchors and carbon fiber straps for bowing walls. Free estimates.
Ask about Driveway Lifting
Tell us about the project and how to reach you.